IP20 G657A1 Wall Mounted Termination Box For Fiber Optic Cable

IP20 G657A1 Wall Mounted Termination Box For Fiber Optic Cable

Indoor IP20 Wall Mounted Optic Terminal Box 2 Core Load With SC/APC Adapters and Pigtails 0.5meter G657A1 LSZH

The optical rosette acts as a termination point of the optical network, it use direct connection or fusion splice in a pre-termination pigtails. It can be installed on the wall, and adapt variety of optical connection styles LC/SC, maximum 2cores.

Specification

Application

FTTH internal environment wall mount

Product details

The box use brand new ABS plastic, white color, total enclosed box with clips at both sides, easy to open and close, no need speical tools.

At top of the box, there is logo print reserved position with paper block if no need, and we can open 2 screws to fix the cover and bottom to make it more safe, then without screw driver, can not open the box by hand. details pls see above picture.

The box front is for adapters exit, only insert the pigtails or patch cord in, then can connected. standard type or shutter type both ok.

The cable enter the box from the bottom middle hole or small square holes at the corners, there is special space for cable routing. Which make it more clean after installation, no cable will be seen by human eye.

if on field installation use mechanical splicer, we can fix a holder at the 4 holes around the big hole in the middle. There are many wall mounting holes design at the bottom plate to make installation easier.

Above picture is fully load with 1pc SC/APC pigtails G657B3 LSZH 1.5meter white color and 1pc SC/APC adapter+ 1pc bare fiber mechnical splicer and holders.

Features

• The box is made of high quality engineeringplastic ABS, brand new materials, not have second hand, white color.
• It can be installed on any vertical flat surface on wall;
• Compact size, light weight, special design;
• According to the internal wiring and structural requirements, the surface adopts gradient design, non planar;
• Capacity to store 2m of optical cord or pigtails with 0.9mm diameter;
• Cable entry from bottom hole, not side or front, this hidden wiring design, more beautiful and safe, to prevent man-made damage to the optical fiber fracture and affect the optical fiber transmission performance;
• There are 2 card-type designs on the left and right sides, which open and close firmly, and the lid is not easy to fall off. It is easy to handle, no other tools are needed during construction;
• The front panel adopts the universal SC adapter, which is convenient and quick, and the construction is simple.

Standard accessories

• 2pcs fixing screws, 2pcs screws for closing the cover, 2sleeve, heat shrink sleeve slot(optional), adapter(optional), pigtail(optional)

G657A1 Wall Mounted Termination Box

IP20 Wall Mounted Termination Box

G657A1 Termination Box

IP20 G657A1 Wall Mounted Termination Box For Fiber Optic Cable Images